cleanUrl: "manual/s2b-en"
If any questions, contact us [email protected]
SHAKS S2/S3/S5 supporting four (4) modes, Android / Windows / iOS, and Mapping, each mode of which is recognized as an individual device by its corresponding host game device. For example, when SHAKS is in android mode, it will connect to your android smartphone/tablet, it works like an “android Gamepad”. But, if you connect it to a windows PC, it does not work correctly (for example, haptic no function), because SHAKS says “I am in android mode”, but the PC can’t hear it, although its Bluetooth connection is made.
First, please note that the gamepad can be paired to one device with an exactly matched mode. It is auto re-pair to the same device once paired, but If you wish to switch from one device to another, please delete previously log data from your device to de-activate its automatic repairing feature, do the pairing process again.
S2 is supporting android, Windows PC, Notebook, iPhone, iPad, Apple TV, Android Phone. Please select a mode-matching your device. And check your service to play!
It is compatible with down-load gaming, Steam Epic Games, and most major cloud game service such as Stadia, X-cloud, Geforce, Luna.
One step more, by our own SHAKS GameHub app, S2 lets you play AAA touch-gaming by console grade controller, name a few, Garena Free Fire, CoD, PUBG, Genshin Impact, Roblox, Slamdunk, etc.
<aside> 💡 Note) Please select the proper mode matching to your device for 100% compatibility according to each protocol. Otherwise, some feature is not supported fully although it looks like connected!
</aside>
Please note the name of each button/key name and LED indication status.
LED #1,2 shows connection and battery charging status and LED #3,4 shows gamepad mode.
Mode change can be done by pressing the "Select+LB" button or "hotkey". Please the LED indication in the below table. The mode will change sequentially from Android→Windows/Mac→ iOS→ Android Mapping. Click to Video
3 Step setup: In power-off status, press two keys simultaneously until booting. This setup is available from xxx 12 (Dec. 21, 2020) firmware. If you have an older version, please upgrade it via the SHAKS Gamehub app. See below how to do 3 step setup.
Find gamepad mode for your device in the table
Change the mode of the gamepad by key or press “Hot Key ”* The default is Android mode. S2 remember the last selected mode until you change it.
Press the 'Select + Start' button for more than 3 seconds and find ‘SHAKS S2 xxxx ’ on the device & click to pair.
Tips)
S2 is not supporting Xbox, Switch, PS4 console.
In the same device, S2 is automatically pairing again whenever you use it again without the pairing process again (Auto-Pairing)
S2 can be paired to one device per an exactly matched mode. If you wish to switch from one device to another,
please delete previously log data from your device to de-activate its automatic repairing feature. And make a new pairing process.
Mode can be initialized by booting. During power-on status, the mode change is not validated. Once you change mode, please reboot it by power off and on again.
How to use mode change in a sequential way: Press "Select+LB" button key together until the LED is on. Then, automatically its power becomes off. Power on again, press "Select+LB" button again for booting. And check the mode. If not it is not in the right model, repeat this process until you see the right LED position to match the mode you want to match. The mode will change sequentially from Android→Windows, Mac→ iOS→ Android Mapping.
How to connect per each mode in detail process
Wired connecting with a USB Cable for Windows, Android
Tips)
Recommended to use Windows 10 or later. If you are using Windows 7, please install “Xbox 360 driver” driver first on your PC that you can find on our website.
With USB C to USB C cable, you can use “wired mode” with a smartphone, connecting as "Xbox compatible gamepad". It follows X-input protocol.
If any issue during setup, please reset the gamepad and your device as below.
Tips)
Enjoy the various AAA touch-only games by SHAKS, name a few Genshin Impact, Roblox, Battleground, League of Legends Wild Rift, Lineage M, Call of Duty, etc.
Firstly, from Google Play, download SHAKS GameHub App.
Pair your gamepad in Touch mode, refer above “Playing on Mapping mode”
Go to GameHub App and make sure the pad is connected properly
At the bottom of the SHAKS App, click Mapping Service > Add New Game > Click the game you want to play
After following the guide on the screen and Mapping Service Manual or look the tutorial video
While you do not need to install the app on your mobile phone to use the gamepad, we highly recommend it so you can benefit from the following features from the mobile app.
Android - Application Manual and download link
Window - Application Manual and download link
Tips) Useful features in our Gamehub app
The options button (O) is set by default as a mouse. If you wish to change the options button into another feature besides the mouse, run the app on your device. Go under “Setting > Function Key Setting” to choose from:
Mouse: navigate the screen or mouse-based "drag & drop" game like Angry Bird
Sniper: Adjust the sensibility in aiming the target in a Shooting game
Turbo: Speed up your gamin in racing games.
Calibration of Analog stick
and more LED brightness, sleeping time control, camera ....
SHAKS is actively testing, verifying the compatibility with each game in each OS, device. Please visit our compatible game list for searching relative information. Or install our Android GameHub app. Here is an example of tips you can find there ;
Play Call of Duty
: 1st, By using the “Touch-mapping” by ‘SHAKS GameHub" App. Please download this app from Google store, and refer to our manual.
2nd, or rename Shaks gamepad ID to “Xbox Wireless Controller” via ‘SHAKS GameHub" App. renaming feature.
The Kart Rider Rush Plus